Views:

Overview

The software version of the TANCO Controller is displayed momentarily during the system's power-up sequence. It is important to note the version number immediately as the controller boots to the main operating screen.

Instructions

  1. Turn On the Controller Begin by turning the power dial or switch on the front of the controller to the "On" position.

     

  2. Observe the Startup Screen Immediately after powering on, the screen will light up and display the TANCO logo.

     

  3. Identify the Software Version During the "TANCO" splash screen, look at the text displayed in the center of the screen. The software version (e.g., SPS369-12nov20 3.3-) will be visible here.

     

Important Notes

  • Timing: The version number is only visible for a few seconds during the startup phase.

  • Missed Information: If the controller reaches the main operating menu before you can read the version, you must turn the unit off and back on again to restart the sequence.

 

Keywords: TANCO, Software Version, Controller, Firmware, Troubleshooting, Startup.
Related Products: 1400-V Autowrap, A100-EH Autowrap, A200-EH Autowrap, K200 Autowrap, Q200-V Autowrap, S100-A Autowrap, S200 C Autowrap, S200-V Autowrap