If the wires have been pulled from the TANCO 1400-V wired remote control unit (Item No. 1409001), the following connection chart should be used to correctly rewire the plug.
Connections Chart
| Core Color | 9-Way "D" Plug Pin No. | Function |
|---|---|---|
| Green | 4 | Lower Left Switch |
| White | 9 | Top Right Switch |
| Orange | 7 | Lower Right Switch |
| Red | 8 | 0V |
| Blue | 5 | Top Left Switch |
Diagram Reference:
Refer to the 9-way D plug diagram provided below for pin numbering.
Note: Crop the unused brown core back to the outer sheath.
Rewiring this unit is a delicate task due to the small wire sizes. If you would prefer, the remote can be returned for repair. Please contact support to arrange this.