The TANCO AUTOCUT M10 Rear Mower requires a total of 36 blades, split between left-hand and right-hand orientations:
- Left-Hand Blades – 20 required
These are to be installed in specific positions on the mower disc units to achieve the correct cutting pattern.- Part Number: CSM00024
- Right-Hand Blades – 16 required
These work in conjunction with the left-hand blades and are fitted in alternating positions.- Part Number: CSM00023
Ensure the arrows on the blades are facing in the direction as indicated by the arrows below.
AUTOCUT M9 Rear Mower
The TANCO AUTOCUT M9 Rear Mower requires a total of 32 blades, split between left-hand and right-hand orientations:
- Left-Hand Blades – 16 required
These are to be installed in specific positions on the mower disc units to achieve the correct cutting pattern.- Part Number: CSM00024
- Right-Hand Blades – 16 required
These work in conjunction with the left-hand blades and are fitted in alternating positions.- Part Number: CSM00023
Ensure the arrows on the blades are facing in the direction as indicated by the arrows below.
M3 Front Mower
The TANCO AUTOCUT M3 Front Mower requires a total of 14 blades, also in left- and right-hand configurations:
- Left-Hand Blades – 6 required
These blades follow the same fitting logic as the M10, providing balanced operation across the front mower's cutting discs.- Part Number: CSM00024
- Right-Hand Blades – 8 required
These complete the blade set for the front mower.- Part Number: CSM00023
Ensure the arrows on the blades are facing in the direction as indicated by the arrows below.
Caution
Blades are double-edged – gloves must be worn during handling operations.
Damaged blades may damage the cutter bar, resulting in a poor cutting performance. Damaged blades must be replaced at the earliest opportunity.
Quick Fit Blades
- Insert the quick fit handle between the disc and the blade retention plate.
- Lever the retention plate downwards and remove the plate.
- Flip the blade over the fresh side, or replace it with a new one if it is damaged or word out.
- Release the quick change handle. The blade retention plate will spring back up and hold the blade in place.