Part No. 1330970 Kit Contains
• ¼” Hydraulic Hosing
• ¼” Q/R Hydraulic coupling
• All relevant hydraulic fittings
Note: If a wrapper is set for Load Sensing Hydraulics, it can also be used on a tractor with no Load Sensing. This is easily done by opening Valve 26 and by not connecting the Load Sensing hose to the tractor.
Step 1.
Connect the hydraulic hose to the LS port located on the main valve block. Please see image below.
Step 2.
The Open/Closed Centre must be in the Closed Position when using machine under LS hydraulics. Adjust this valve (26) fully inwards for LS.